Minolta Magicolor 3100 Series - Manual (Page 179)

Chapter 3 Removal and Replacement Procedures
3-177
RRP4.2 ROLL TURN (PL4.1.2)
Figure: ROLL TURN Removal
Removal
1) Remove the CHUTE ASSY REGI. (RRP9.3)
2) Remove the HOUSING ASSY RETARD. (RRP4.1)
3) Remove the CLUTCH TURN. (RRP4.4)
4) Remove the left side of E-ring securing the ROLL TURN to the HOUSING ASSY RETARD (PL4.1.1).
5) Pull out the BEARING EARTH (PL4.1.13) securing left side of bearing of the ROLL TURN from the
HOUSING ASSY RETARD.
6) Pull out the BEARING (PL4.1.8) securing the right side of bearing of the ROLL TURN from the HOUS-
ING ASSY RETARD.
7) Slide the ROLL TURN from the HOUSING ASSY RETARD rightward, pull out the left side of bearing of
the ROLL TURN from the bearing bore and pull out the ROLL TURN left upward.
Replacement
Replace the components in the reverse order of removal.