Minolta Magicolor 3100 Series - Manual (Page 147)

Chapter 3 Removal and Replacement Procedures
3-145
Removal
1) Pull out the CASSETTE from the printer.
2) Release the hooks at 2 positions securing the CHUTE ASSY TURN to the printer FEEDER.
3) Turn the CHUTE ASSY 90 degrees rearward from the printer FEEDER.
4) Release the hook securing the right and left shaft of the CHUTE ASSY TURN to the printer FEEDER.
5) Pull out the CHUTE ASSY TURN from the printer FEEDER and remove.
Replacement
Replace the components in the reverse order of removal.