Rrp3.15 sensor photo:low paper (pl3.3.3), Rrp3.15 sensor photo:low paper (pl3.3.3) -171 – Minolta Magicolor 3100 Series User Manual

Page 171

Advertising
background image

Chapter 3 Removal and Replacement Procedures

3-169

RRP3.15 SENSOR PHOTO:LOW PAPER (PL3.3.3)

Figure: SENSOR PHOTO:LOW PAPER Removal

Removal

1) Pull out the CASSETTE from the printer.
2) Remove the COVER TOP MAIN. (RRP1.4)
3) Remove the COVER SIDE L. (RRP1.14)
4) Remove the COVER SIDE R. (RRP1.9)
5) Remove the CHUTE ASSY TURN. (RRP3.1)
6) Remove the LINK ACTUATOR (RRP 3.17).
7) Remove the COVER CASSETTE REAR. (RRP3.2)
8) Remove the FEEDER ASSY UNIT. (RRP3.3)
9) Remove the PICKUP ASSY. (RRP3.12)
10) Remove the connector (P/J473) on the SENSOR PHOTO:LOW PAPER.
11) Release the hooks at 3 positions securing the SENSOR PHOTO:LOW PAPER to the PICKUP ASSY

(PL3.3.1).

12) Remove the SENSOR PHOTO:LOW PAPER from the PICKUP ASSY.

Replacement
Replace the components in the reverse order of removal.

Advertising