Minolta Magicolor 3100 Series - Manual (Page 201)

Chapter 3 Removal and Replacement Procedures
3-199
RRP6.6 ELIMINATOR ASSY (PL6.1.9)
Figure: ELIMINATOR ASSY Removal
Removal
1) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
2) Remove the COVER MSI. (RRP1.11)
3) Remove the TRAY ASSY MSI. (RRP1.12)
4) Remove 1 screw securing the ELIMINATOR ASSY to the CHUTE ASSY OUT (PL6.1.1).
5) Raising the left end of the ELIMINATOR ASSY upward, pull out the ELIMINATOR ASSY toward the
left to remove from the CHUTE ASSY OUT.
Replacement
Replace the components in the reverse order of removal.