Minolta Magicolor 3100 Series - Manual (Page 132)

3-130
RRP1.8 LINK:R (PL1.1.23)
Figure: LINK:R Removal
Removal
1) Remove the COVER TOP MAIN. (RRP1.4)
2) Remove the COVER ASSY FRONT IN. (RRP1.10)
3) Remove the COVER SIDE R. (RRP1.9)
4) Extract the upper hook of the SPRING LINK:R (PL1.1.22) from the projection on the right side of the
printer.
5) Slide the LINK:R rearward from the printer and align the shaft of the printer and the hole of the LINK:R.
6) Remove the LINK:R from the printer together with the SPRING LINK:R.
7) Remove the SPRING LINK:R from the LINK:R.
Replacement
Replace the components in the reverse order of removal.