Minolta Magicolor 3100 Series - Manual (Page 166)

3-164
RRP3.12 PICKUP ASSY (PL3.3.1)
Figure: PICKUP ASSY Removal
Removal
1) Pull out the CASSETTE from the printer.
2) Remove the COVER TOP MAIN. (RRP1.4)
3) Remove the COVER SIDE L. (RRP1.14)
4) Remove the COVER SIDE R. (RRP1.9)
5) Remove the CHUTE ASSY TURN. (RRP3.1)
6) Remove the LINK ACTUATOR (RRP 3.17).
7) Remove the COVER CASSETTE REAR. (RRP3.2)
8) Remove the FEEDER ASSY UNIT. (RRP3.3)
9) Remove the SWITCH ASSY SIZE. (RRP3.8)
10) Shift the harness of the PICKUP ASSY from the right hook of the FEEDER ASSY UNIT.
11) Remove 2 screws securing the PICKUP ASSY from the FEEDER ASSY UNIT.
12) Raise the PICKUP ASSY from the FEEDER ASSY UNIT.
Replacement
Replace the components in the reverse order of removal.