Rrp4. housing assy retard, Rrp4.1 housing assy retard (pl4.1.1), Rrp4. housing assy retard -178 – Minolta Magicolor 3100 Series User Manual
Page 178: Rrp4.1 housing assy retard (pl4.1.1) -178
Advertising
3-176
RRP4. HOUSING ASSY RETARD
RRP4.1
HOUSING ASSY RETARD (PL4.1.1)
Figure: HOUSING ASSY RETARD Removal
Removal
1) Remove the CHUTE ASSY REGI. (RRP9.3)
2) Remove the connector (P/J19) of the CLUTCH TURN (PL4.1.9) from on the PWBA HB MCU
(PL12.1.1) of the printer.
3) Release LINK: L and LINK: R from their leaf springs and slowly open the front cover to gain access to
the HOUSING ASSY RETARD.
4) Remove 3 screws securing the HOUSING ASSY RETARD to the printer.
5) Remove the HOUSING ASSY RETARD from the printer.
Replacement
Replace the components in the reverse order of removal.
Advertising