Minolta Magicolor 3100 Series - Manual (Page 165)

Chapter 3 Removal and Replacement Procedures
3-163
Removal
1) Pull out the CASSETTE from the printer.
2) Remove the COVER TOP MAIN. (RRP1.4)
3) Remove the COVER SIDE L. (RRP1.14)
4) Remove the COVER SIDE R. (RRP1.9)
5) Remove the CHUTE ASSY TURN. (RRP3.1)
6) Remove the LINK ACTUATOR (RRP 3.17).
7) Remove the COVER CASSETTE REAR. (RRP3.2)
8) Remove the FEEDER ASSY UNIT. (RRP3.3)
9) Release the hooks at 2 positions securing the HOLDER SHAFT (PL3.2.9) to the HOUSING ASSY
FEEDER R of the FEEDER ASSY UNIT.
10) Pull out the GUIDE INDICATOR from the HOUSING ASSY FEEDER R together with the SPRING
INDICATOR (PL3.2.11) and SHAFT INDICATOR (PL3.2.12).
11) Pull out the GUIDE INDICATOR from the SHAFT INDICATOR.
Replacement
Replace the components in the reverse order of removal.
Put the leading end of LEVER LOW PAPER (PL3.2.7) on a left convex portion of the
GUIDE INDICATOR, when replacing the GUIDE INDICATOR.