Minolta Magicolor 3100 Series User Manual
Page 391
Advertising
Chapter 7 Wiring Diagrams and Signal Information
7-391
♦
Heater rated power: 600 ± 30W 100V
♦
Thermostat contact open temperature: 160°C ± 5°C
Signal line name
Description
EXIT PAPER SENSED(L)+3.3VDC Paper detection signal in fuser by Exit Sensor in FUSER ASSY
FUSER_STS
Heat Roll surface temperature data (analog value) measured by
Temp Sensor to determine the fuser control temperature
HEATER ON(L)
Heater ON/OFF control signal
AC N
Neutral side of AC input from power supply (Heater power supply
voltage)
AC L
Line side of AC input from power supply (Heater power supply
voltage)
Advertising