Minolta Magicolor 3100 Series - Manual (Page 199)

Chapter 3 Removal and Replacement Procedures
3-197
RRP6.4 SENSOR PHOTO:DUP (PL6.1.4)
Figure: SENSOR PHOTO:DUP Removal
Removal
1) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
2) Remove the COVER MSI. (RRP1.11)
3) Remove the TRAY ASSY MSI. (RRP1.12)
4) Remove the COVER ASSY FRONT. (RRP1.13)
5) Remove the ACTUATOR DUP. (RRP6.8)
6) Release the hooks at 3 positions securing the SENSOR PHOTO:DUP to the CHUTE ASSY OUT
(PL6.1.1)
7) Remove the SENSOR PHOTO:DUP from the CHUTE ASSY OUT and remove the connector
(P/J133)
Replacement
Replace the components in the reverse order of removal.