Minolta Magicolor 3100 Series - Manual (Page 205)

Chapter 3 Removal and Replacement Procedures
3-203
Removal
1) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
2) Remove the COVER MSI. (RRP1.11)
3) Remove the TRAY ASSY MSI. (RRP1.12)
4) Remove the COVER ASSY FRONT. (RRP1.13)
5) Release the hooks at 2 positions securing the COVER ACTUATOR (PL6.1.14) to the CHUTE ASSY
OUT (PL6.1.1) of the printer.
6) Remove the COVER ACTUATOR from the CHUTE ASSY OUT.
7) Pushing the actuator of the ACTUATOR DUP inward from the CHUTE ASSY OUT, slide the ACTUA-
TOR DUP leftward and extract the right side shaft of the ACTUATOR DUP from the right side bearing.
8) Extract the ACTUATOR DUP from the CHUTE ASSY OUT together with the SPRING SNR DUP.
9) Remove the SPRING SNR DUP (PL6.1.15) from the ACTUATOR DUP.
Replacement
Replace the components in the reverse order of removal.