Minolta Magicolor 3100 Series - Manual (Page 256)

3-254
RRP11.6 PWBA ASSY EARTH (PL11.1.16)
Figure: PWBA ASSY EARTH Removal
Removal
1) Remove the FUSER ASSY. (RRP8.1)
2) Remove the BTR UNIT ASSY. (RRP8.4)
3) Remove the COVER TOP MAIN. (RRP1.4)
4) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
5) Remove the COVER MSI. (RRP1.11)
6) Remove the TRAY ASSY MSI. (RRP1.12)
7) Remove the COVER ASSY FRONT. (RRP1.13)
8) Remove the CHUTE ASSY EXIT. (RRP7.1)
9) Remove the COVER ASSY FRONT IN. (RRP1.10)
10) Remove the COVER SIDE L. (RRP1.14)
11) Remove the COVER SIDE R. (RRP1.9)
12) Remove the CHUTE ASSY OUT. (RRP6.1)
13) Remove the FRONT ASSY IN. (RRP5.1)
14) Remove 2 screws securing the PWBA ASSY EARTH to the printer.
15) Remove the PWBA ASSY EARTH from the printer.
Replacement
Replace the components in the reverse order of removal.