Minolta Magicolor 3100 Series - Manual (Page 193)

Chapter 3 Removal and Replacement Procedures
3-191
RRP5.6 LATCH L (PL5.1.30)
Figure: LATCH L Removal
Removal
1) Remove the FUSER ASSY. (RRP8.1)
2) Remove the COVER ASSY FRONT IN. (RRP1.10)
3) Release the latch at A from the printer and open the FRONT ASSY IN (PL5.1.1).
4) Release the hook at 1 position securing the LATCH L to the left side of the FRONT ASSY IN.
5) Remove the LATCH L from the FRONT ASSY IN.
Replacement
Replace the components in the reverse order of removal.