Minolta Magicolor 3100 Series - Manual (Page 170)

3-168
RRP3.14 SENSOR PHOTO:NO PAPER (PL3.3.3)
Figure: SENSOR PHOTO:NO PAPER Removal
Removal
1) Pull out the CASSETTE from the printer.
2) Remove the COVER TOP MAIN. (RRP1.4)
3) Remove the COVER SIDE L. (RRP1.14)
4) Remove the COVER SIDE R. (RRP1.9)
5) Remove the CHUTE ASSY TURN. (RRP3.1)
6) Remove the LINK ACTUATOR (RRP 3.17).
7) Remove the COVER CASSETTE REAR. (RRP3.2)
8) Remove the FEEDER ASSY UNIT. (RRP3.3)
9) Remove the PICKUP ASSY. (RRP3.12)
10) Turn up the PICKUP ASSY (PL3.3.1).
11) Remove the ACTUATOR NO PAPER. (RRP3.16)
12) Remove the right side of the ROLL ASSY FEED (PL3.3.3) from the PICKUP ASSY. (RRP3.13)
13) Remove the connector (P/J472) on the SENSOR PHOTO:NO PAPER.
14) Release the hooks at 3 positions securing the SENSOR PHOTO:NO PAPER to the PICKUP ASSY.
15) Remove the SENSOR PHOTO:NO PAPER from the PICKUP ASSY.
Replacement
Replace the components in the reverse order of removal.
RIGHT
LEFT