Minolta Magicolor 3100 Series - Manual (Page 260)

3-258
RRP12.2 FAN REAR (PL12.1.2)
Figure: FAN REAR Removal
Removal
1) Remove the COVER TOP MAIN. (RRP1.4)
2) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
3) Remove the COVER MSI. (RRP1.11)
4) Remove the TRAY ASSY MSI. (RRP1.12)
5) Remove the COVER ASSY FRONT. (RRP1.13)
6) Remove the COVER ASSY FRONT IN. (RRP1.10)
7) Remove the COVER SIDE L. (RRP1.14)
8) Remove the COVER SIDE R. (RRP1.9)
9) Remove the COVER REAR. (RRP1.6)
10) Remove the connector (P/J166) on the LVPS from the right side surface of the printer.
11) Shift the harness (P/J166) of the FAN REAR from 3 hooks of the HOLDER TCRU ASSY of the printer.
12) Remove 2 screws securing the FAN REAR from the printer.
13) Remove the FAN REAR from the printer.
Replacement
Replace the components in the reverse order of removal.