Minolta Magicolor 3100 Series - Manual (Page 222)

3-220
RRP8.5 STRAP (PL8.1.13)
Figure: STRAP Removal
Removal
1) Release the latch at B from the printer and open the CHUTE ASSY OUT (PL6.1.1).
2) Release hooks that secure the bottom portion of STRAP, and slide the bottom portion of STRAP
toward the right to remove from the CHUTE ASSY OUT.
3) Turning the top of STRAP secured to the upper right of the FRONT ASSY IN (PL5.1.1), meet a convex
portion with the key hole in the FRONT ASSY IN and pull out the top of STRAP to remove the STRAP.
Replacement
Replace the components in the reverse order of removal.