Minolta Magicolor 3100 Series - Manual (Page 89)

Chapter 1 Troubleshooting
1-89
FIP-P8 Skewed Image
Condition / initial check
Print skewing
∆ Image is printed in skewed position.
▼ Initial check ▼
Incorrect parts, improper installation, damage, deformation, dirt, foreign substance attached, etc.
∇ Major parts to be checked ∇
PAPER FEEDER, CHUTE ASSY REGI, CHUTE ASSY OUT, Transfer Unit (BTR), Imaging Unit (PHD), ROS
ASSY
Item Check Remedy
1
Faulty paper setting
Check if paper or paper cassette is set normally.
Set the paper and paper cassette
normally.
(Ask customer for correct setting)
2
Faulty paper transfer path
Check the paper transfer path for presence of burrs,
foreign substances or dirt.
Clean or replace the parts concerned
3
Faulty paper feed rolls
Check if the paper feed rolls feed the paper normally.
Clean or replace the parts concerned
4
Faulty paper transfer rolls
Check the paper transfer rolls for evidence of foreign
substances, dirt, deformation, or malfunction.
Clean or replace the parts concerned
5
Checking ROS ASSY for mounting
Check if ROS ASSY for mounting
Replace the ROS ASSY
6
Faulty Imaging Unit (PHD)
Is the image quality improved if Imaging Unit (PHD) is
replaced
Replace the Imaging Unit (PHD)