Grain Systems PNEG-707GSI - Manual (Page 194)

18. Windows and Doors
194 PNEG-707 12', 18', 24' and 30' GSI Commercial Tower Dryer
Screened Windows
See Orientation Section on Page 32 for flat layout for window placement in the dryer model.
NOTE: Screened windows provide free air and cool fan motors.
Be sure each fan motor is centered in a screened window. (See Figure 18AB.)
Check that 18" screened windows are level and square to dryer.
1. Pre-assemble 18" window kit as in section Pre-assembly of Window Kits on Page 189 . This is the
window frame.
2. Install window frame to dryer as in section Installation of Window Kits (18" and 24") on Page 191 .
3. Trim window screening to size of window frame.
Double nut screening to window with existing bolts on outside wall sheets.
Tighten bolts securely.
Figure 18AB Window is centered on fan motor.
NOTE: Window screen and outside wall sheets are not yet installed.
Figure 18AC Inside View - Screened window is centered on fan.