Grain Systems PNEG-707GSI - Manual (Page 93)

7. Outside Ladder
PNEG-707 12', 18', 24' and 30' GSI Commercial Tower Dryer 93
While Installing each Catwalk, Install Outside Ladder with Safety Cage
1. Above catwalk: Halt safety cage 7' 8' above catwalk. Continue outside ladder through catwalk.
2. Below catwalk: Measure, cut, and install safety cage 44 vertical channel supports to meet bottom
of catwalk. Continue installing outside ladder with safety cage.
While Installing each Platform, Secure Outside Ladder with Safety Cage to it.
Bend and cut safety hoops to meet vertical uprights on catwalk or platform. Trim safety hoops back
where necessary for access to platform.
Figure 7P Close Up - Securing safety hoop to vertical support.
Figure 7Q Ground view - Ladder with safety cage
installed through catwalks and to platform.
NOTE: Platform design may vary from above design.