Grain Systems PNEG-707GSI - Manual (Page 228)

21. Hopper
228 PNEG-707 12', 18', 24' and 30' GSI Commercial Tower Dryer
Hopper (Cross Section) Example - All Models (Continued)
Figure 21AC Bringing hopper channels (R.H./L.H.)
into dryer through opening in cool section floor.
Figure 21AD View from above - R.H. and L.H. hopper
channels bracket each other (arrow).
Figure 21AE View from above - Installing R.H. and
L.H. hopper channels to bracket each other.
Figure 21AF View from below - Installing
R.H. and L.H. hopper channels.
Figure 21AG Snug bolt all R.H./L.H. hopper
channels in place, then tighten.
Figure 21AH Pre-assembling one (1) inside hopper
flange to each inside hopper panel.