Electrical control system, Chapter 25 electrical control system – Grain Systems PNEG-707GSI User Manual

Page 254

Advertising
background image

254

PNEG-707 12', 18', 24' and 30' GSI Commercial Tower Dryer

25. Electrical Control System

See Appendix A on Page 435

for recommended tools and equipment list,

Appendix B on Page 437

for hardware, etc.

The electrical control system consists of a main power box and a control box. The control box is
usually attached and wired to the power box at the factory.

(See Figure 25A.)

See “electrical installation manual” for steps to install electrical control system.

Until electrical control system is installed, place it on dryer foundation and secure it to dryer leg.

Figure 25A

Figure 25B Electrical Control System

Important Safety Precautions:
Dryer has sharp edges. These sharp edges may cause serious injury. Use
appropriate personal protective equipment. Use proper lifting techniques.

B

A. Power box.
B. Control box with electronic monitoring
control system.

A

Advertising