Grain Systems PNEG-707GSI User Manual
Page 216
Advertising
19. Tower Base
216
PNEG-707 12', 18', 24' and 30' GSI Commercial Tower Dryer
Follow Manufacturer’s Instructions to Apply Ceramic Epoxy
Figure 19AE Drill proper size hole.
Figure 19AF Clean Out Hole
Figure 19AG Fill hole with ceramic epoxy.
IMPORTANT: Thoroughly clean all debris
out of drilled hole for proper
epoxy adhesion.
Figure 19AH Insert HILTI HAS anchor bolt.
Move bolt up and down several times
to remove air pockets from epoxy.
Advertising