FlexLink XS (45 мм) Монтаж - Manual (Page 11)

Assembly 11
Feet (continued)
Mounting castors to structural beam T-slot:
XCAG 80
Mounting:
Box wrench 13 mm
Screw (included) M6S 8×25
Filling washer (included) 3905065
Washer (included) BRB 8,4×16
Slot nut (included) XLAQ 8
1 The picture shows the mounting order for castor fas-
teners.
2 Insert screw and filling washer into the screw hole
located on the castor yoke. Add washer and slot nut.
3 Slide the foot into the structural beam T-slot.
4 Screw the castor onto the beam using a wrench.