FlexLink XS (45 мм) Монтаж - Manual (Page 36)

36 Assembly
Chain (continued)
Mounting the chain using a beam section for
chain installation
X_CC 160/XKCC 200
Mounting:
Allen key
Pin insertion tool X..MJ
Clamp
1 Loosen the screws on the beam section flanges.
2 Remove the flange so that the chain becomes acces-
sible.
3 Clamp the chain to the beam profile. Use the
FlexLink chain tool to remove a steel pin from the
chain, so that two links are separated.
4 Remove excess links and use the chain tool to put the
chain back together again.