FlexLink XS (45 мм) Монтаж - Manual (Page 25)

Assembly 25
Idler units (continued)
Mounting idler units
Mounting:
Caution:
The opening between the links when they
turn around the idler could be a risk. Idler
ends should not be accessible during con-
veyor operation. (For mounting of idler end
protective cover, see next page.)
Mounting idler end protective cover
Mounting:
Allen key 4 mm
1 Insert the idler unit connecting strips into the
T-slots of the beam end.
2 Secure the idler unit to the beam using an Allen key to
tighten the set screws.
Allen key
1 Remove three of the five M5×10 screws that holds the
idler end side plate in position.
2 Slide the cover onto the idler end unit.
3 Insert and tighten the three M5 screws that are deliv-
ered with the cover