FlexLink XS (45 мм) Монтаж - Manual (Page 19)

Assembly 19
Conveyor beams
Introduction
Conveyor beams are mounted on to the support structure
by means of support brackets. There are three different
types of conveyor beam support brackets. They all serve
the same purpose but are connected to the structural
beams in different ways.
Beam support brackets
Type A: XLCT..
Type A brackets are used with crossing 64 mm or 88 mm
support beams. These brackets can also be used as drip
tray connectors
Type B: X..CS.. (aluminium)
Type B brackets are used with vertical support beams
and are made from either aluminium or polyamide. The
aluminium types can be used instead of drip tray brack-
ets. (See example on page 48)
Type B: X..CS.. (polyamide)
When attaching plastic beam support brackets, always
use a flat washer between nut and bracket. The nuts can
be covered by plastic plugs.
Type C: XLCU 73
Type C brackets are used for connecting two parallel con-
veyor beams to an 88 mm vertical support beam.