FlexLink XS (45 мм) Монтаж - Manual (Page 43)

Assembly 43
Guide rail system (continued)
Connecting guide rails
For connection of guide rails, you will need connecting
plugs (XLRJ 10/15) or connecting sleeves (XLRJ 100).
Mounting
Guide rail ends
XLRE 10/15
Mounting:
Connecting plugs are pressed into two guide rail ends.
Connecting sleeves are fastened to the guide rail ends
with set screws and an Allen key.
Make sure you place the connecting sleeves on the
outer side of the guide rail.
Plug all guide rail ends with end plugs. Use a soft faced
hammer when inserting the plugs.