FlexLink XS (45 мм) Монтаж - Manual (Page 59)

Assembly 59
XK pallet system (continued)
5 Fasten the foot to the floor.
6 Remove the cover from the locating station. Mount a
pair of XCBM 44 beams (
≈270 mm long) underneath
the locating station, using M6S 8×20 screws, washers
and XCAN 8 slot nuts.
7 Tighten all screws.
8 Tighten the guide pins on one side. Loosen the other
pair.
9 Insert square nuts in the vertical beam T-slots. Use
angle brackets to mount short pieces of XCBM 44
beam on the vertical beam.