FlexLink XS (45 мм) Монтаж - Manual (Page 13)

Assembly 13
Feet (continued)
Mounting polyamide feet
XEFG
Polyamide feet are used with 64 mm structural beams
only.
Mounting:
Adjusting mounts and vibration absorbers
XLFS 20 P, XLFJ 69
Mounting:
Allen key 5 mm
Hex socket head screws (included) MC6S 8×16
1 Mount the foot onto the beam end by sliding the foot
compression clamps into the beam T-slot.
2 Tighten the screws. The recommended tightening
torque is 15 Nm.
1 Adjusting mounts are screwed onto the bottom of the
foot and fastened with the locking nuts that are
included.
2 Vibration absorbers are snapped on to the bottom of
the adjusting mounts.