FlexLink XS (45 мм) Монтаж - Manual (Page 63)

Assembly 63
XK pallet system (continued)
6 Mount the opposite guide rail section. Check that the
guide rail joints are aligned. Tighten the guide rail
bracket fasteners.
7 Adjust the position of the bend and fasten the con-
necting strips and guide rail brackets.
8 Start mounting the slide rail approximately 200 mm
before the bend.
9 Drill two holes in the slide rail and fix it with plastic
screws.
10 Install the rest of the slide rail using the mounting tool.
Cut the slide rail so that all joints are smooth (do not
cut in an angle).