FlexLink XS (45 мм) Монтаж - Manual (Page 44)

44 Assembly
Guide rail system (continued)
Guide rail cover
XLRT
Mounting:
Guide discs/guide rails in bends
XLRG
At the inner bend of horizontal wheel bends, a plastic
guide disc can be used instead of regular guide rail.
Mounting:
To prevent products from being scratched, a plastic guide
rail cover can be snapped on to the inside of the guide rail
(15 mm guide rail only).
Make sure that all cover joints are smooth, so that prod-
ucts do not get caught or damaged. Do not join covers on
top of guide rail joints.
1 Remove the wheel bend cap.
2 Press the guide disc into place on top of the wheel
bend.