FlexLink XS (45 мм) Монтаж - Manual (Page 61)

Assembly 61
XK pallet system (continued)
14 Place two distance pieces (2,5 mm thick) between the
locating station and the conveyor beam, one on each
side of the beam, to keep the locating station cen-
tered.
15 Connect the four beam pairs together using angle
brackets.
16 Mount the cover on to the locating station.
17 Mount the pallet stop.
18 Position the pallet stop by placing a pallet onto the
locating station. Then tighten the pallet stop 0,5–
1,0 mm in front of the pallet (see drawing).
0,5–1,0