FlexLink XS (45 мм) Монтаж - Manual (Page 16)

16 Assembly
Beam connectors (continued)
Connecting beams using angle brackets
XMFA, XLFA
Angle brackets are used to connect beams end-to-side or
side-to-side.
Mounting:
Box wrench 10 mm
Screws M6S 8×16
Slot nuts M8 thread
Washers BRB 8,4×16
1 Three different kinds of slot nuts can be used when
mounting angle brackets: connecting strip
XLCJ 5×76, square nut XLAQ 8 or slot nut XCAN 8.
2 Insert the required amount of slot nuts into the struc-
tural beam T-slot. Mount the angle bracket using
screws and washers.
3 Mount the angle bracket to the transverse beam in the
same manner. Tighten all screws.