FlexLink XS (45 мм) Монтаж - Manual (Page 9)

Assembly 9
Feet (continued)
Mounting adjusting feet
XCFS 12×68
Mounting:
XLFS 8
Foot XLFS 8 can be mounted directly onto beams XCBM/
XCBR 44 or directly into any T-slot.
Connection to beam XCBM/XCBR 44:
1 Attach an end plate to the beam end.
2 Screw the foot onto the end plate and tighten with nut.
Connection to structural beam T-slot:
1 Insert a slot nut into the structural beam T-slot.
2 Screw the foot onto the beam and tighten with nut.
Wrench 19 mm
Nut (included) M12
Washer (included) For M12 screw
1 Screw the foot onto the XCFE end plate.
2 Tighten the nut using a wrench.