ZOLL X Series Monitor Defibrillator Rev D User Manual
X series, Service manual
Advertising
Table of contents
Document Outline
- Table of Contents
- Preface
- Maintenance Tests
- X Series Overview
- Maintenance Tests
- 1.0 Physical Inspection of the Unit
- 2.0 Operational Tests
- 3.0 Leads Test
- 4.0 Heart Rate Display Test
- 5.0 Heart Rate Alarm Test
- 6.0 Power Supply Test
- 7.0 Leakage Current Test
- 8.0 Shock Test
- 9.0 Advisory Test
- 10.0 Synchronized Cardioversion Test
- 11.0 Pacer Test
- 12.0 Printer Test
- 13.0 Treatment Report Test
- 14.0 SpO2 Test (for SpO2 feature without SpCO and SpMet)
- 15.0 SpO2, SpCO, and SpMet Test (for SpO2 feature with SpCO, or SpCO and SpMet)
- 16.0 EtCO2 Calibration (required for annual calibration)
- 17.0 EtCO2 Calibration Check
- 18.0 EtCO2 Test
- 19.0 IBP Test
- 20.0 NIBP Calibration Check
- 21.0 NIBP Leak Test
- 22.0 Deflation Test
- 23.0 Inflation Test
- 24.0 NIBP Test
- 25.0 Temperature Test
- 26.0 Wi-Fi Test (Optional)
- 27.0 Audio Recording Test (Optional)
- Troubleshooting
- Disassembly Procedures
- Overview
- Required Equipment
- Safety Precautions
- Modules
- Removing the Handle
- Removing the Printer Module
- Disassembling the Main Unit
- Removing the Front Enclosure Module
- Removing the Display Module
- Removing the EtCO2 and NIBP Modules
- Removing the Monitor Board and SpO2 Modules
- Removing the Defibrillator Boards and Capacitor Bank Modules
- Removing the Dock Connector
- Removing the CP Carrier Module
- Removing the AUX Power Connector
- Replacement Parts
- Functional Description
- Appendix A
- Appendix B
- Maintenance Test Checklist