NORD Drivesystems BU0260 - Manual (Page 5)

Supplementary Manual CANopen for NORDAC SK 200E About this document
BU 0260 GB 5
Intended use of the frequency inverter
Compliance with the operating instructions is necessary for fault-free operation and the
acceptance of possible warranty claims. These operating instructions must be read before
working with the device!
These operating instructions contain important information about servicing. They must
therefore be kept close to the device.
The field bus technology options described here are intended for use in combination with SK
200 E series frequency inverters. Use with other series is only possible with the SK TU4-
CAO(-C) and SK TU4-CAO-M12(-C) technology modules for the SK 500E. The use of these
technology options with other devices is not permitted and can lead to their destruction.
The field bus technology options and the associated frequency inverters are devices for fixed
installation on motors or in equipment close to the motor to be operated. All details regarding
technical data and permissible conditions at the installation site must be complied with.
Commissioning (implementation of the intended use) is not permitted until it has been
ensured that the machine complies with the EMC directive 89/336/EEC and that the
conformity of the end product meets the machine directive 89/392/EEC (note EN 60204).
 Getriebebau NORD GmbH & Co. KG, 2009