2 node guarding protocol – Lenze EMF2178IB User Manual
Page 85
Advertising
Monitoring
Node Guarding Protocol
l
85
EDSMF2178IB EN 3.0
11.2
Node Guarding Protocol
)
Note!
ƒ
Only one monitoring function can be active:
– Heartbeat or node guarding.
ƒ
Heartbeat has priority over node guarding:
– If both functions are configured, the heartbeat settings will be active.
The "Node Guarding Protocol" serves to monitor the connection between the NMT master
and the NMT slave(s) within a CAN network.
)
Note!
An NMT master can be a PLC with a CAN interface or a PC card.
The NMT slave function of the "Node Guarding Protocols" (DS301, version
4.01) is supported by the EMF2178IB communication module.
2175COB001
Fig. 11−1
Telegram transfer between NMT master and NMT slave
Advertising