3converting from transport to field position, Removing tow-bar, Converting from transport to field position – MacDon D65 SP DHOM User Manual
Page 102: 3 converting from transport to field position
Advertising
4.15.3
Converting from Transport to Field Position
To convert the header from Transport to Field position, follow these steps.
Removing Tow-Bar
Remove tow-bar as follows:
1.
Block the tires to prevent header rolling, and unhook
from towing vehicle.
2.
Disconnect wiring connector (A) on tow-bar.
3.
Remove pin (B) from tow-bar and disassemble outer
section (C) from inner section (D).
Figure 4.71: Tow-Bar Assembly
A - Wiring Connector
B - Pin
C - Outer Section
D - Inner Section
4.
Disconnect wiring connector (A) at front wheel.
Figure 4.72: Wiring Connector
169899
90
Revision A
Advertising