MacDon D65 SP DHOM - Manual (Page 82)

OPERATION
3. At divider storage location, lift divider to disengage
lugs (A) at lower end and then lower it slightly to
disengage pin (B) from endsheet.
Figure 4.51: Stored Crop Divider
4. Position crop divider as shown by locating lugs (A) in
holes in endsheet.
5. Lift forward end of divider until pin (B) at top of divider
engages and closes latch (C).
6. Push safety lever (D) down to lock pin in latch.
Figure 4.52: Crop Divider
A - Lugs B - Pin
C - Latch D - Safety Lever
169899 70 Revision A