MacDon D65 SP DHOM - Manual (Page 245)

MAINTENANCE AND SERVICING
Installing Drive Cover
Install reel drive cover as follows:
1. For SINGLE REEL DRIVE, position reel drive cover (A)
to the reel drive and secure with four bolts (B).
Figure 6.236: Single Reel Drive Cover
2. For DOUBLE REEL DRIVE, position the lower cover
(C) first (if removed) and secure with three bolts (D).
Install upper cover (A) using the six bolts (B).
Figure 6.237: Double Reel Drive Cover
6.9.4 Replacing Drive Chain on Double Reel
The drive chain on a high torque double reel drive can be replaced using two methods. Refer to:
• Disconnecting the Reel Drive Method, page 234
• Breaking the Chain Method, page 236
Both procedures are acceptable, but disconnecting the reel drive method is preferred because the chain integrity is
not affected.
169899 233 Revision A