MacDon D65 SP DHOM - Manual (Page 120)

HEADER ATTACHMENT/DETACHMENT
5. Push hose connectors onto mating receptacle until
collar on receptacle snaps into lock position.
6. Remove cover on electrical receptacle (A).
7. Push electrical connector onto receptacle and turn
collar on connector to lock it in.
8. Attach cover to mating cover on tractor wiring.
Figure 5.3: Header Receptacles
A - Electrical Connector B - Knife Drive
C - Case Drain (Double Knife) D - Draper Drive
E - Return
9. Lower lever (A) and engage in down position.
Figure 5.4: Hose Storage
10. Before connecting reel hydraulics, check connectors
and clean if required.
Figure 5.5: Reel Hose Storage
169899 108 Revision A