MacDon D65 SP DHOM - Manual (Page 121)

HEADER ATTACHMENT/DETACHMENT
11. Open cover on header receptacle (A).
12. Push in lock button (B) and pull handle (C) to half
open position.
Figure 5.6: Reel Hydraulics Receptacle
13. Remove hose bundle with multi-coupler (C) from
windrower, locate onto header receptacle and push
handle (B) to engage pins on connector.
14. Push handle away from hoses until lock button (A)
snaps out.
15. Raise and lower header and reel a few times to allow
trapped air to pass back to the reservoir.
Figure 5.7: Reel Hose Connection
169899 109 Revision A