MacDon D65 SP DHOM - Manual (Page 274)

OPTIONS AND ATTACHMENTS
8.2.3 Stub Guard Conversion Kit
Stub guards, complete with top guides and adjuster shoes,
are designed to cut tough crops.
Installation and adjustment instructions are included in
the kit.
Order bundle according to the length of your header:
• 15 ft. – MD #B5009
• 20 ft. – MD #B5010
• 25 ft. – MD #B5011
• 30 ft. – MD #B5012
• 35 ft. – MD #B5013
Figure 8.6: Stub Guards
8.2.4 Vertical Knife Mounts
The vertical knife 21 mounts allow installation of vertically
oriented knives onto both ends of the header.
Installation and adjustment instructions are included with
the bundle.
Order bundles based on left or right side:
• LH – MD #B5757
• RH – MD #B5758
NOTE:
If mounting on multiple headers, you will also require the
auxiliary vertical knife plumbing kit MD #B5406.
Figure 8.7: Vertical Knife Mount
21. Must be purchased from a separate supplier.
169899 262 Revision A