MacDon D65 SP DHOM - Manual (Page 236)

MAINTENANCE AND SERVICING
Installing Drive Cover
Install reel drive cover as follows:
1. For SINGLE REEL DRIVE, position reel drive cover (A)
to the reel drive and secure with four bolts (B).
Figure 6.214: Single Reel Drive Cover
2. For DOUBLE REEL DRIVE, position the lower cover
(C) first (if removed) and secure with three bolts (D).
Install upper cover (A) using the six bolts (B).
Figure 6.215: Double Reel Drive Cover
6.9.2 Replacing Double Reel U-Joint
The reel drive U-joint allows movement between the two reels. This allows either reel to move independently.
Lubricate the U-joint in accordance with the requirements. Refer to 6.3.6 Lubrication and Servicing, page 132 .
U-joint should be replaced if severely worn or damaged. Refer to Removing Double Reel U-Joint, page 225 .
169899 224 Revision A