MacDon D65 SP DHOM - Manual (Page 278)

OPTIONS AND ATTACHMENTS
8.4.4 Draper Deflector (Wide)
Wide metal deflectors attach to the inboard side of the
endsheets, to prevent material from falling through the gap
between the endsheet and draper.
Refer to the D65 Draper Header Parts Catalog (MD
#169902) for required parts.
Figure 8.13: Draper Deflector
8.4.5 Draper Extension Kit
This kit increases the length of each deck up to 10 in.
(250 mm) into the header opening which decreases the
swath width when cutting light/thin crops.
It includes roller support extensions, a draper repair kit
and necessary hardware.
Installation instructions are
also included.
MD #B5407 25
8.4.6 End Swath Deflector Rods (End Delivery)
End deflector rods are used for double swathing with end
delivery only, but can be kept on for center delivery.
The rods help prevent the delivered crop at the opening
from interfering with standing crop.
Installation and adjustment instructions are included with
the kit.
Order bundles based on left or right end.
• Left - MD #B5088
• Right - MD #B5089
Figure 8.14: Swath Deflector
25. Not for use with Double Draper Drive (DDD).
169899 266 Revision A