MacDon D65 SP DHOM User Manual
Page 197
Advertising
3.
Adjust the drive roller at ‘X’ as follows:
a.
Loosen nuts (A) and jam nut (B).
b.
Turn adjuster nut (C).
Figure 6.119: Drive Roller
4.
Adjust the idler roller ‘Y’ as follows:
a.
Loosen nut (A) and jam nut (B).
b.
Turn adjuster nut (C).
5.
If the draper does not track at the idler roller end after
adjusting the idler roller, the drive roller is likely not
square to the deck. Adjust the drive roller, and then
readjust the idler roller.
Figure 6.120: Idler Roller
169899
185
Revision A
Advertising