MacDon D65 SP DHOM User Manual
Page 229
Advertising
Tine Tube Support (If installed) Bushings
20. Position bushing halves (B) on tine tube with flangeless
end adjacent to reel arm, and locate lug in each
bushing half in hole in tine tube.
21. Slide support (C) onto bushing (B). For the opposite
tine tube, rotate support (C), or slightly move tine tube,
so that it clears channels (D).
Figure 6.194: Support
Figure 6.195: Opposite Support
22. Install bushing clamp (A) onto tine tube adjacent to
flangeless end of bushing (B).
23. Position clamp (A) on bushings (B) so that edges
of clamp and bushing are flush when clamp fits into
groove on bushing and lock tabs are engaged.
Figure 6.196: Bushing Clamp
169899
217
Revision A
Advertising