MacDon D65 SP DHOM - Manual (Page 233)

MAINTENANCE AND SERVICING
6.9 Reel Drive
The reel is hydraulically driven through a chain case that is attached to the right end on a single reel header, and
between the reels on a double reel header.
6.9.1 Replacing Reel Drive Sprocket
Removing Drive Cover
1. Remove the reel drive cover (A) as follows:
a. For SINGLE REEL DRIVE, remove the four
bolts (B) that secure the cover (A) to the reel drive.
b. For DOUBLE REEL DRIVE, remove the six
bolts (B) that secure the upper cover (A) to the
reel drive and to the lower cover (C).
NOTE:
The lower cover (C) may also be removed by
taking off the three bolts (D).
Figure 6.206: Single Reel
Figure 6.207: Double Reel
169899 221 Revision A