MacDon D65 SP DHOM - Manual (Page 193)

MAINTENANCE AND SERVICING
3. Turn bolt (A) counterclockwise to fully loosen draper.
White indicator bar (B) will move outboard in direction
of arrow to indicate that draper is loosening.
Figure 6.111: Draper Tensioner
4. Push draper away from cutterbar (as shown) to expose
deck support (A).
NOTE:
There are two or three supports, depending on
header size.
5. Remove two center nuts (B) at each support.
6. Move deck away from cutterbar to disengage
deck supports.
Figure 6.112: Deck Support
169899 181 Revision A