MacDon D65 SP DHOM - Manual (Page 280)

OPTIONS AND ATTACHMENTS
8.4.10 Upper Cross Auger (UCA)
Attaches in front of the backtube, the UCA improves
feeding of crop to the center of the header in heavy crop
conditions. Ideal for high volume harvesting of forages,
oats, canola, mustard and other tall, bushy, hard to
feed crops.
Order bundle 26 according to the length of your header:
• 15 ft. – MD #B4844
• 25 ft. – MD #B4846
• 30 ft. – MD #B4847
• 35 ft. – MD #B4848
• 40 ft. – MD #B4849
Figure 8.17: Upper Cross Auger
8.4.11 Upper Cross Auger Hydraulic Kit for DDD
This kit is required to provide hydraulic power to the upper
cross auger on headers with both upper cross auger and
double draper drive kits installed. Operating both options
without this kit can result in damage to the upper cross
auger motor and inadequate power to the draper drive
system.
This kit is not applicable to M100 and M105
windrowers.
MD #B5606
8.4.12 Upper Cross Auger Case Drain Kit for SDD
This kit is intended for single draper drive headers
equipped with an upper cross auger and is applicable to
all M-Series windrowers, except the M205.
MD #5842
Figure 8.18: Case Drain
26. MD #B5606 is required to operate both upper cross auger (UCA) and double draper drive (DDD) on an SP Windrower.
169899 268 Revision A